ابر برچسب ها
لينک دوستان
پر مخاطب ها
آخرین مطالب
لینک های روزانه
آرشيو مطالب
امکانات وب
Note: Be sure to stop and cut off the power when checking and troubleshooting. Check whether the bearing is damaged, whether the carbon brush is wo, and polish the rust on the commutator surface. Increase the stocking density, increase the feeding intensity of the breeding objects, promote growth, greatly increase the yield per mu, and fully achieve the purpose of increasing income from breeding. Its aeration power efficiency exceeds that of aquatic aerators in the form of waterwheel, inflatable, and water spray.
Overhaul and maintenance of aquatic aerators: aquatic aerators are equipment that drives working parts through power sources such as electric motors or diesel engines to quickly transfer the 'oxygen' in the air to the aquaculture water body. When starting up, pay attention to the transportation of the aquatic product aerator. It has a simple structure and can form water flow and stir water. Check the wear of the shaft, gear and other parts of the reduction box, and whether the oil seal is intact.
Inspection and maintenance must be carried out: rotate Wholesale Jet Aerators Factory the motor rotor by hand during the inspection to see if there is any in the machine. After a period of use, the motor, gearbox, impeller, pontoon and circuit of the aquatic aerator are easily damaged and malfunctions., you should stop it immediately and restart it after troubleshooting. The sound of friction and collision. The jet aerator can increase the water body's oxygen smoothly without damaging the fish body, and is suitable for aeration in the fry pond.
It can comprehensively utilize physics and chemistry It can not only solve the problem of fish floating head caused by lack of oxygen in pond aquaculture, but also eliminate harmful gases, promote convective exchange of water bodies, improve water quality conditions, reduce feed coefficients, and increase fish pond activity and primary productivity. If there are phenomena such as reverse rotation, abnormal noise, unstable vibration, etc.
It is found that the buoyancy of the floating body is reduced due to wear and tear, and it should be checked and repaired to avoid the increase of the load and the buing of the motor. If damage is found, it should be repaired and replaced. When the winding or attachment on the impeller is found, it should be removed in time. During operation, pay attention that people and animals are not allowed to approach the impeller of the aerator to avoid damage from the impeller
The third is the jet aerator: its structure is simple, it can form water flow, stir the water body, can make the water body aerobic slowly, not damage the fish body, suitable for use in the fry pond. There are more than 90 varieties of products. Because they believe that loach will not be hypoxic and tenacious, it will not consider it. It is currently the most used aerator. The second is a waterwheel type aerator: it has a good aeration and promotes the effect of water flow, suitable for ponds with deep silt.
To The company mainly produces and operates brand environmental protection equipment, vortex type medium pressure air pump, Yuting brand medium pressure air pump, and fishing equipment. However, with environmental pollution, pesticide erosion and man-made overfishing, wild loach is becoming automatic fish feeder less and less. According to different ponds and different water depths, we will introduce several aerators suitable for different water bodies. The dissolved oxygen in the water body of the aquaculture pond is maintained at 4mg/l-5mg/l, and the fish in the pond can grow normally.
Oxygenate.Generally speaking, loach is not hypoxic, because loach has gill respiration and intestinal respiration. Even if the water is drained, the loach can survive for a period of time in the absence of water, because the loach can also pass through the body surface. Long-term and continuous hypoxia will inevitably affect the growth of the loach and increase the incidence of the loach. The fifth is the aeration pump: because of its light weight, easy operation and single aeration function, it is generally suitable for use in aquaculture ponds or greenhouses with a water depth of less than 1 meter and an area of less than 1 mu. Artificial breeding of loach has become a trend.
However, the loach living in low-dissolved oxygen water for a long time will not only restrict growth, but also affect various physiological activities, which will eventually lead to an increase in the feed coefficient and affect the economic benefits of breeding. Farmers can choose according to their actual conditions: One is the impeller type aerator: it has the comprehensive effects of aeration, water stirring, and gas explosion. Possibility. However, the operation noise is relatively large, and it is generally used in large-area ponds with a water depth of more than 1 meter. With more than 530 specifications, nearly 2 million units of vortex air pumps have been applied and implemented since production. The fourth is the water jet aerator: it has a good oxygenation function, which can quickly increase the dissolved oxygen content of the surface water body in a short time, and it also has an artistic appreciation effect, which is suitable for breeding in tourist areas.
It can be seen that even the loach, which is extremely resistant to hypoxia, cannot do without sufficient oxygen during the growth process. In order to create greater economic benefits in a certain area of pond, farmers tend to cultivate loach with high density. The skin breathes, so it is generally believed that loach is not hypoxic. Generally, the dissolved oxygen of the fish will be as low as 2mg/l before it will float, and the loach will be lower. In a certain area, the high density of the loach itself, the long-term rainy weather, and the fish medicine splashed by regular water disinfection will cause the hypoxia of the breeding loach pond
It runs with little or no oil, and the output air is clean; if the pump body is integrally die-cast and Wholesale automatic fish feeder Supplies used With the anti-vibration mounting feet, the requirements for the installation foundation are also very low. A good aquatic product aerator can make a good harvest for farmers who have been busy for a year. The above is the impact of the pros and cons of aquatic aerators. If it is a poor-quality aerator, it will make the farmers' efforts in vain, so the quality requirements are very strict.
For more than 20 years, although the main performance and quality of aquatic aerator products have been greatly improved, compared with foreign countries and Taiwan Province of China, the production process, product reliability and appearance quality, especially plasticization There is still a big gap. If there are hidden safety hazards, it will cause personal and property losses to fishermen.. The high-pressure fan can even run normally without fixing the feet, which is very convenient and saves installation costs and installation cycles; aquatic aerators are relatively Similar fans have low operating noise, just like the ultra-quiet high-pressure fan introduced by Gao Rui Fan: high reliability.
At the same time, the development of new products is not ideal for many reasons. It can be used for both suction and air blowing. Today I will give you a brief analysis. The unique design of the air mixing chamber allows for a large amount of inhaled air, mixes evenly with water, produces fine and many bubbles, and has a high dissolved oxygen rate.
I hope everyone can choose a good aquatic aerator to improve the security of the aquaculture industry. The performance of aquatic aerators will directly affect the production and cost of aquaculture.What are the effects of the pros and cons of aquatic aerators? Many farmers are asking this question. A good aquatic product aerator has dual functions of blowing and sucking. When the usage changes, the machine can still operate safely
. There is no need for other accessories during rotation, no friction during operation, and no inteal lubrication, so the output air It is completely oil-free, pure and environmentally friendly; the products are strictly tested and verified before leaving the factory to ensure the high efficiency of customer use. This product has been widely used in sewage treatment, pneumatic conveying, mining, chemical industry, smelting, building materials, electric power, flour, vacuum packaging and aquaculture industries. The impeller of the aerator fan is directly connected to the motor shaft.
The company provides a variety of power and size options; the motor meets the European EFF2 standard, which is particularly power-saving And durable; the new design of the bearing front makes our products very dynamic and stable during operation; the research and design Shrimp Farming Aerators of the products adopt the most advanced technology in Germany, using ADC12 aluminum one-time die-casting, high-precision CNC machine tool processing; motor insulation grade is TEFC IP54 standard, insulation class F, the body temperature can be as high as 180 degrees.
Our company has always been market demand-oriented, supported by technological innovation, based on the principle of characteristic development, and constantly through system innovation , Technological innovation, as always, dedicated to providing high-quality products and services to new and old customers. Regarding the performance of the aerator fan, I will give you a specific introduction. The products produced by our company have the characteristics of reasonable structure, small size, high efficiency, low noise, stable operation, long service life and convenient maintenance.Longxiang Machinery, a professional manufacturer of aeration fans, is an enterprise engaged in Roots aerators and aquatic aerators.
The high-performance sealing ring effectively prevents foreign matter from entering the body, effectively improving the service life of the product; the fan can run smoothly and quietly for a long time after testing. For more detailed information, please log on to our company's official website for inquiries
Therefore, the aeration controller can automatically adjust the dissolved oxygen in the water according to the wishes of the farmers to keep it at an appropriate level, thereby effectively preventing floating heads and flooding. Today, I summarized it for everyone. When taking out the oxygen electrode from the floating bucket, do not loosen the screw cap of the oxygen electrode tail to avoid damage to the seal. This can extend the life of the electrode. Unscrew the old membrane head and discard it, then clean the gold and silver parts of the oxygen electrode, fill the new membrane head with electrolyte at the same time, and screw on the membrane head.
Once the dissolved oxygen in the water drops below the waing value, the aeration controller will automatically increase oxygen. When the adaptation value is above, it will automatically stop aeration. If the oxygen electrode has low pollution and stable performance, it is not necessary to replace the membrane head and electrolyte even though the service life exceeds four months. are Roots aerators, aerators, aquatic aerators, etc. According to the above method, the aquatic product aerator can be maintained.
You can follow the following methods to maintain it. Use a cotton swab dipped in clean water to gently wipe off the dirt on the surface of the oxygen electrode. We will serve our customers wholeheartedly based on the principle of honesty, honesty and integrity.The producer can set the waing value or adaptation value of the aeration controller according to the demand for dissolved oxygen in aquaculture products. When the oxygen electrode is not used for a long time, discard the electrolyte, rinse it with distilled water, wipe it clean and Paddle Wheel Aerators suppliers store it dry. Cleaning of oxygen electrode and replacement of membrane head.
First, exteally clean the oxygen electrode. If you like, please feel free to visit the factory. Maintenance tips for the oxygen electrode of the aquaculture aerator controller, I I think that now everyone can only use aquatic aerators simply, but don't know how to maintain it. The occurrence of major accidents such as ponds has greatly reduced the breeding risks of demonstration households. The electrode should generally be cleaned every 40 to 60 days, or the membrane head should be replaced and calibrated
Sufficient dissolved oxygen in the pond water ensures the growth of aquatic animals and improves the survival rate, specifications and output of aquaculture. The aeration area is wide, the dissolved oxygen is released uniformly, and the bottom dissolved oxygen is increased, and the bottom ammonia nitrogen and nitrous acid The oxidation of salt and hydrogen sulfide inhibits the growth of harmful microorganisms at the bottom. I hope you can support us. supplies aquatic products aerators, Roots aerators and other products.
Safety and environmental protection: The microporous aeration and aeration device is installed on the shore with good safety performance and will not cause any pollution to the water body. The sufficient dissolved oxygen enables the water body to establish a natural ecosystem and make the water alive.. We have introduced a lot of knowledge about aerators. Other aeration methods are working in the water, which is easy to leak electricity, which is harmful to the Solar Powered Automatic Shrimp Feeder human body, fish and shrimp.
Aquatic aerator talk 5. 'Microporous aeration' causes the water to rotate and flow up and down, bringing harmful gases out of the water at the bottom, improving the water quality of the pond and reducing the occurrence of diseases. The aquatic aerator is about 3.
Today, we will popularize the microporous aeration and aeration devices developed by new technology. Efficient dissolved oxygen: Due to the bubbles generated by ultra-fine hole aeration, the contact surface with water in the water body is extremely large, the floating velocity is low, and the contact time is long, so the oxygen mass transfer efficiency is extremely high.
صفحات وب
درباره وب
ورود
خبرنامه
آمار سایت
تبلیغات متنی